Products
China Copper Wire Drawing Machine Manufacturers - Water tank wire drawing machine – Sanjin
China Copper Wire Drawing Machine Manufacturers - Water tank wire drawing machine – Sanjin Detail:
Water tank wire drawing machine: Mainly used for drawing metal wire, such as producing mesh wire, nail making, wire rope, etc.
Compared with LW560 pulley wire drawing machine, this machine occupies a small area, saves electricity and has high efficiency. At the same time, its cooling effect is good, so the wire will not be twisted, the finished silk quality is good, and the surface is free of grease.
The deceleration box, water box and wire take-up box of the machine are installed on the same base and are hoisted as a whole. The surface of the machine is painted with high-grade paint, and the inside and outside of the electric control cabinet are all sprayed with plastic, and equipped with famous brand electrical components. The machine runs smoothly, with low noise, good stability and small maintenance. Due to the use of famous brand bearing standard parts, the design of the take-up bevel gear ratio is reasonable, and its service life is higher than that of similar products in the market. The take-up transmission system adopts a coupling, which is designed and installed in sections. The pressure on the shaft is evenly distributed, which not only improves the service life of the bearing, but also makes it easier for installation and maintenance. For the water leakage problem reported by the customer, this machine has also been improved, which avoids the broken wire of the finished reel and the loose wire caused by the gear gap caused by the full gear transmission during use. This greatly improves labor productivity and reduces the labor intensity of workers.
Water tank wire drawing machine
LT11/450、LT13/450、LT15/450
v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
| (mm) Drum’s diameter | 450 | 450 | 450 | 450 | 450 | 450 |
| Dies number | 11 | 11 | 11 | 13 | 13 | 15 |
| (mm)Max.diameter of wire inlet | 2.0 | 3.4 | 4.0 | 4.0 | 3.8 | 4.0 |
| (mm) Min.diameter of wire outlet | 1.2 | 1.5 | 1.9 | 1.6 | 1.5 | 1.6 |
| (m/min) Finished wire speed | 350 | 260-320 | 260-320 | 280 | 280 | 280 |
| (kw) Motor’s power | 30-45 | 30-45 | 30-45 | 30-45 | 30-45 | 30-45 |
Water tank wire drawing machine
LT11/350、LT15/350
v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
| (mm) Wire winding drum’s diameter | 350 | 350 | 350 | 350 | 350 |
| Dies number | 11 | 11 | 11 | 15 | 15 |
| (mm) Max.diameter of wire inlet | 1.8 | 2.5 | 3.0 | 2.2 | 2.6 |
| (mm) Min. diameter of wire outlet | 0.8 | 1.0 | 1.5 | 0.7 | 0.8 |
| (m/min) Finished wire speed | 450 | 450 | 450 | 650 | 650 |
| (kw) Motor power | 22-37 | 22-37 | 22-37 | 30-45 | 30-45 |
Water tank wire drawing machine
LT17/280、20/280(200)
v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
| Type/dies number | 17 | 20 | 25 |
| (mm) Max. diameter of wire inlet | 2.8/2.0 | 3.0/1.8 | 1.5/0.8 |
| (mm) Min. diameter of wire outlet | 0.7/0.5 | 0.5/0.3 | 0.4/0.2 |
| (m/min) Finished wire speed | 900 | 900 | 1200 |
| (kw) Motor power | 22 | 37 | 45 |
Water tank wire drawing machine
LT9/560、LT13/560、LT11/560、LT15/560
v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
| (mm) Drum’s diameter | 560 | 560 | 560 | 560 |
| Dies number | 9 | 11 | 13 | 15 |
| (mm) Max.diameter of wire inlet | 6.5 | 6.5 | 6.5 | 6.5 |
| (mm) Min.diameter of wire outlet | 2.7 | 2.2 | 2.0 | 1.7 |
| (m/min) Finished wire speed | 250 | 280 | 320 | 320 |
| (kw) Motor’s power | 75 | 90 | 90-110 | 90-132 |
Product detail pictures:
Related Product Guide:
Our items are commonly identified and trusted by customers and may fulfill continuously switching economic and social wants of China Copper Wire Drawing Machine Manufacturers - Water tank wire drawing machine – Sanjin , The product will supply to all over the world, such as: Poland, Algeria, Toronto, We've been persisting in the business essence Quality First, Honoring Contracts and Standing by Reputations, providing customers with satisfying products and service. Friends both at home and abroad are warmly welcome to establish everlasting business relations with us.
By Ann from Detroit - 2017.05.31 13:26
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Iris from Rwanda - 2018.02.04 14:13