Products

The wire pointing machine is the first machinery of the drawing operation, the raw material will be rolled through the head tip, and then the drawing will be carried out through the die loading, according to the requirements of the product specifications, the tip will be rolled and drawn several times in the middle to complete the finished product processing purpose.

Structure:
The wire pointing machine is made of a pair of Φ96 alloy steel rolls. The lower rolls are of fixed structure and the upper rolls are of adjustable structure, so that the work is both stable and can be adjusted for proper clearance.

The machine uses triangle tape for initial deceleration, worm gear for intermediate deceleration, and then a pair of synchronous gears to drive the upper and lower rolls relative to each other.

Mechanisms:
Periodic rotation eccentric tip rolling machine is a more advanced tip rolling machine, due to the roll type with eccentric, the formation of deep and shallow groove hole, and divided into three areas, one is the special pressure tip steel wire penetration area, the second is the steel wire through the hole type gradually compressed tip press, (about 125 degrees of the area), three is the above two areas between the transition area.

Rollers in any case are relatively outward drive, when the rollers turn to wear into the area, you can be pressed into the steel wire between the rollers then rollers counter-rotation quarter, wear into the area disappeared, the steel wire began to be compressed, and the continuation of the 125 degree pressure thin area, after the steel wire compression thin, the rollers and turn to wear into the area, while the steel wire will be pushed out.

v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}