Products

UN-10 type butt welding machine (or electric jointing machine), suitable for medium and low carbon steel, non-ferrous metal (such as copper, aluminium and its alloy) wire, shaped wire and other contact butt welding with. Modern wire drawing equipment, are used in various types of continuous multiple wire drawing machine drawing the required specifications of wire, in order to maintain continuous production of wire drawing machine, improve the operating rate, butt welding machine is the metal products industry wire production, processing, the use of indispensable auxiliary equipment. In the construction industry the welder is also an ideal piece of special equipment.

How to use:

The operation of butt welding is not complicated, the operator understands the performance of the welding machine, hold up the adjustment technology, through practice, you can get high quality butt welding head in fast conditions. Before welding, the steel wire must be straight and cut, the surface of the oil, oxidation rust, etc., should be clean, then, a clip in the electrostatic jaws, another clip in the dynamic electrode jaws, so that the two ends of the alignment, level, adjust the secondary voltage (Note: the secondary voltage determines the heating speed, do not make the wire fuse, the highest secondary voltage is better. (This ensures short welding time and high joint strength). According to the diameter of the weld, a reasonable choice of end from the jaw inside and outside the length of the extension (jaw activity distance of half, thick steel wire outreach more, thin steel wire outreach less). Master the top pressure and power-on time so that the contact surface occurs to weld.

The welding parts are clamped in the static and dynamic electricity, the contact is energised, the transformer secondary winding induces high intensity current, the welding parts get welding temperature and have the condition of plastic deformation, the operating handle pushes the dynamic electrode, the joint generates top pressure, the contact surface is welded.

v:* {behavior:url(#default#VML);}
o:* {behavior:url(#default#VML);}
x:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}